Bottle!

[Artwood]

OK, i gased up my marker with air, i fired about 100 shots out of it and it still read it had about 1500 left inside, i turned off the air, and tried to unscrew the bottle, and the bottle unscrewed, but the reg ontop of the bottle stayed in the gun! so after crapping my self thinking a full bottle of air was about to blow me to tiny peices, i fired off all the air thouygh the gun, and unscrewed it without blowing up, question is, how to i now put the reg back on, do i just screw it back on without sealing it with locktite or something?

[Artwood]

heres the pics of it

[wouse101]

EDITED BY SAMURAI JACK COS I GIVE VERY BAD ADVICE

[alan phoenix]

do not use any type of loctite or anything or your bottle will fail its test when it neads to be tested. clean or renew the seal that sits in the dimple on the bottle and screw reg on tight by hand..

[wouse101]

well i better be beating the crap outta someone then for that "useful bit of info" he gave me, good job you corrected me!

[Tom]

You should use loctite to put CO2 valves into CO2 bottles though.