Software for cockers

[simtec]

Hi All

As you know i now have a e1 autococker And have been looking for a better board Dose anyone know if you can get a software to up the board at the moment it at 1.06 or is it a case of just change the board

Also been looking at the board and there is a port on it for a reprom Has anyone tryed contacting eclipse to see if this can be done


Thanks for your time

Simon

[Dusty]

you can if you are lucky find people who still have the odd zero B board.

these will (with the right version software) allow different ramping modes. if it doesn't have the right software Eclipse will still flash the board for you.

Failing that i believe Virtue do a cocker board as well, but most likely you will have to order it from the states as I don't know anyone who keeps them in stock.

hope this helps

**edit** after diggin around a little, i have realised that it wasn't virtue at all, it was a scenario dreams T-board.

My brother MAY have a spare one in his kit bag, and at the same time he MAY have sold it already. I will try to find out for you as quickly as possible.

[sid_sidgwick]

The T boards are a great little board, the Zero-b is a big upgrade just a little hard to find.

Keep your eyes peeled for one

[simtec]

Also lads Im wanting a good trigger as well Mine is the wide standard trigger and would like one that i can increese my fire rate

Thanks again all

Simon

[sid_sidgwick]

something a bit like this then Si:

http://www.belsales.co.uk/samuraiTriggerChrome.jpg

Belsales have a few left mate about £20 or stick a post up in the wanted section for a samurai blade trigger

[simtec]

something a bit like this then Si:

http://www.belsales.co.uk/samuraiTriggerChrome.jpg

Belsales have a few left mate about £20 or stick a post up in the wanted section for a samurai blade trigger

eww Shiny parts Will have a look into it mate been on the phone to eclise mate today thay have ran me throw some faster settings for the cocker and if still not happy thay will supply me a zerob board for £70

so will see what its like wednesday mate


Thanks again sid

[Scrumpy]

i was gunna say eclipse hooked me up with a zero b and full service for my 04 black magic about 3 months ago for £90.
Belsales are about the only place left in England still doing cocker parts, and even then i think it's just the odds and sods they've got left :( ! Welcome to a dying breed simon...the happy cocker owner.

[sid_sidgwick]

yes Belsales are the only place left in the UK doing bits, there are plenty in the US but then you get stung by the obligatory customs charges (Ie Gordon Browns pie fund)

Most cocker troubles will come down to O-rings or by playing with the settings and buggering up the timing.

Check out Moodypaintball.com (think its .com) if you ever have a problem as it is a great site for teching your marker

Theres something about cockers that feels special, it was my first marker an ive had many since but still have one as my second marker