Bone daddy problem

[Uk_striker]

Ive recently brought a bone daddy and had my gas filled up and it worked perfectly. then i stripped and cleaned it and put back together and once again it worked. my problem is now that i have cleaned it for a second time it does not work!!


it seems to leek gas once i turn it on, mainly through the barrel

i have obviosly stripped and made sure that it has gone back together correctly, which for all intense and purposes it has (my dad, brother and 3 of my mates have looked)

anyone have any ideas on this problem please enlighten me

:)

[Parksy]

Did you relube the neccesary parts when you put it back together? :)

[Fatbobs]

Leaks down the barrel are always down to cup seals.

It sounds like you have either not seated the cup seal properly or left it out (Depending on how much gas comes down the barrel)

Remove the cup seal, give it a quick clean and lube and then replace.

This should sort out the problem.

If it doesn't and you bought it from Fat Bob's, give us a call.

Andy

[Uk_striker]

Thanks guys will try that.

however what part is the cup seal and what is the best lube.

NB i did get it from fat bob


thanks again

[Tom]

In general, best lube for blowbacks like that is silicon spray. You can just put a squirt in the bottom line and then fire a bit of gas through the gun, that will help lube most of the seals up.

As for the cup seal, http://www.paintball-paradise.com/spyder_lpvalve.jpg The cup seal on this valve is the big clear/white rubber bit on the left.

[Uk_striker]

Thank you