Shocker 03

[the influences]

ok so why does the shocker 03 chop and is it fixable?
or do i have to live with my mistakes?

[Fatbobs]

The best Shocker Tech I have seen is Bongo who marshals in the PA cup.

If anyone sees him before my, please ask him to register on this forum

His tech knowledge would be very useful.

[Parksy]

In theory the shocker 03 should not chop if you have vision on it. If you do not have vision then a fast loader should cure the problem, a halo being better for this type of marker than an egg as they can shoot stupid fast :)

If you have a halo and still chop make sure the balls aren't being forced past the ball detents making it appear like ball breaks when in fact you have two balls in the breech.

Also check the normal things like you have a good paint to barrel match and they aren't breaking in the barrel.

Do you have paint on the bold and in the back end of the breech, or is the paint visible in the front of the breech and the barrel?

If it is an early 03. ie #0-3900 have you had it in for the free factory upgrade to rectify the early problems with them?

Best resource for technical info on the shocker is www.impulseownersgroup.com :)

Hope some of that helps

Dave

[the influences]

iv got vision and its +3900 but it breaks on the bolt, its almost like the vision does not work, but when i check to see if it does work it does.
i need it sorted by the millennium seize so if i need to get anything tell me?
or is it still as mystery

[Parksy]

What loader are you using? If it is a halo you may need stronger detents. If it is a halo your using try it with an egg to check if it is the loader causing the problem :)

Check paint to barrel match and make sure the it isn't getting stuck in the barrel and breaking in the breach/bolt :)

Try a different brand paint, maybe it is too fragile for the conditions you are using it in? or poor quality?

Just thoughts... worth a try though.

[the influences]

yeah, cheers mate ill try that, at the moment i'm using a revy (not a good choice) but ill get and egg soon,
as for paint its quite bad nel splat, or hotspot so ill try with pearl or something a bit more classy.

im in the south of France so the conditions are relatively good

well thanks a lot
ill tell ya if there are anymore problems