Question about dropforward and bottom lines

[magnumPI]

hello,

i am interested in getting an evo cocker as my next marker, but i am curious about the dropforward and bottom line. They arent included and after looking on Fat Bobs im curious about them. do they come with the screw caps that you screw the bottles into attatched to the dropforward? I am planning on getting a preset air system for it and am a little lost on how it works as i only have experience of CO2 systems!

Also, i dont know how the Bottom Lines work - how do they fit on your marker and how do they fit in the dropforward? plus, where can i get them?

-James 'Patrick' Moore

[Bloody Whisper]

ok i hope this will be of some small help and answers your question.

The bottom line would screw into your reg then from there sraight into the side of the drop forward. and as for the drop forwrd if you are going to be using air it may be an idea to get a drop forward with a on/off switch on the front of it. then the air/co2 then screws straight into the drop forward. 32 degrees do a good one.

Scott

[Bloody Whisper]

Anybody feel free to correct/elaborate if i am slightly off

Scott:D

[VagabondStarJXF]

do they come with the screw caps that you screw the bottles into attatched to the dropforward?

I assume you're talking about the ASA adapter... Drops/Cradles sometimes come with it but mostly they don't.

If you're going to use an air system you should get yourself an On/Off adapter. It'll allow you to turn your air on and off so you can remove it from your marker a little more safely. I'd recommend the Addon with On/Off from Marksmann (Its what I've just bought for myself)
Or you could get a reg that fits on to your drop, therefore bypassing the need for an ASA adapter at the end of the bottomline hose. The Armageddon has been recommended to me. I think it's made by American Airgun Designs or something.

I hope that adds to Bloody Whisper's answer!:)