Please Help Species alien Timmy

[Bloody Whisper]

if any body can help with the biggest bit of stupidity ever then any help is greatly recived!

Playing with my new timmy i just purchsed i was fiddling with it and i mistakingly reset all the settings on my marker! so now i can not manage to get the bps back to normal! i pull the trigger then there is a delay of at least a second before the marker fires. before it was set at around ten! if anybody can help great!

i have tried the boblong site and cannot seem to download anything!

the board is a version 2.7!

thanks everybody

Scott :D

(species alien intimidator)

[Fatbobs]

Have a look at the tech help post in the Intimidator section.

Andy

[Parksy]

Look at the WAS board manual. Are you firing it with paint in the breech? If not it sounds like you have the board set to 'delayed' mode. This is where if the eye does net sense paint it waits about a quater of a second or so before trying to fire :) Try it with paint in and it should be fine. If you are using a halo or egg try using the marker with paint and setting the board to 'forced' :)

Hope that helps...

Dave

P.S. Don't fiddle with a marker when its working!! :D

[Bloody Whisper]

aha sorted it! the delay was as follows.... i think for the following reason....maybe.

The bolt was pushed back minus any air so the i pulled the triger and the marker was waiting to fire! if i pushed the bolt forward it fires like a loon! (well the counter shoots up at a silly speed any way!)

Scott:D