PDA

View Full Version : My Timmy AGAIN


Bloody Whisper
24-06-2004, 09:49
Ok another silly question!

if i stick my 3000psi bottle of air into my marker is it going to blow the internals. i know the out put from the bottle is 800psi but the timmy runs at a max of 500psi. will the torpedo reg lower it further?

Am i totally off the mark?

Does this make sense?

Damn why didnt i stick to the cocker! :D So much less to break:D

Scott
Tom
24-06-2004, 11:16
The torpedo will regulate the 800psi in down to the 500psi or so the timmy needs.
Bloody Whisper
24-06-2004, 13:46
tried that and it didnt i have now orderd a new gauge to replace the one that has exploded :(

Scott
Bloody Whisper
25-06-2004, 02:00
and now a new adjustable bottle reg to lower the pressure before it enters the marker :rolleyes:

Scott
Parksy
25-06-2004, 07:14
What have you changed? Just in a previous post you had problems with the way it was firing, and now this has hapened? :)

Have you changed anything else? LPR pressure, the pressure of the torpedo reg?
Tom
25-06-2004, 08:16
I'm not going mental am I - the torpedo reg is the vertical reg into the timmy?
Parksy
25-06-2004, 08:17
Originally posted by Tom
I'm not going mental am I - the torpedo reg is the vertical reg into the timmy?

Indeed it is Tom :)
Bloody Whisper
25-06-2004, 10:00
havent changed a thing i think i am just havin spate of bad luck with it. i found the reason for it not firing (well the trigger delay) was because the bolt was pushed to the back of the marker was waiting for paint to enter before firing. that parts fine now.

this marker is just too flash for me! bit complicated and i think is going to take some getting used to. :D

Scott
Bloody Whisper
25-06-2004, 10:02
just orderd the other bits to be safe from now on at least i know i wont kill the marker even further! :rolleyes:

Scott
Tom
25-06-2004, 16:12
Originally posted by Bloody Whisper
tried that and it didnt i have now orderd a new gauge to replace the one that has exploded :(

Scott

I'd get the reg checked out, the vertical reg should take the pressure down to something the marker can handle. If the gauge blew then I'd get it looked at before you put another gauge on it and blow that too.
Bloody Whisper
25-06-2004, 17:29
will do were can i get it checked at?
paintordie
25-06-2004, 17:37
Where you from :confused:
Bloody Whisper
25-06-2004, 21:07
Live in the croydon area. bit of a trek from any place really

Scott
paintordie
25-06-2004, 21:23
Try lps they should be able to help www.lpspaintball.biz (btw there not in london)