alan phoenix
09-10-2004, 20:31
ok people, i have a slight problem with eblade.
started getting slight blowback and marker not cocking properly air escaping from front of marker where solenoid / three way is.
im'd my mate who knows a bit about eblades,he told me sounded lile your cocking rod has moved (back block hitting body when forwards. adjusted c/r by rotating back block a turn.
cocker works like a dream now but myvelocity is down from 285 to 220 ish was told to slightly increade pressure in b/m reg to get it back up 1/8th of a turn should do it . which way do i turn up reg is it screw in(clockwise) or out (aniclockwise).
nead answer asap thanks.
started getting slight blowback and marker not cocking properly air escaping from front of marker where solenoid / three way is.
im'd my mate who knows a bit about eblades,he told me sounded lile your cocking rod has moved (back block hitting body when forwards. adjusted c/r by rotating back block a turn.
cocker works like a dream now but myvelocity is down from 285 to 220 ish was told to slightly increade pressure in b/m reg to get it back up 1/8th of a turn should do it . which way do i turn up reg is it screw in(clockwise) or out (aniclockwise).
nead answer asap thanks.