Spyder Aggressor what extras do i need

[doug]

Hi

I Have A Spyder Aggressor with a VL Revalution Hopper

And Use CO2 and dont want Air at the moment

what would you recommend doing to it


Thanks


Doug

[Munk3h]

Keep it absolutely bone stock! Save all your pennies until you can afford a second hand cocker or Impy (Looking around 250)! Ok so you can upgrade a spyder till its the mutt's nutts of spyders but its still a spyder and performance will always be limited by that! Plus when/if you decide to sell you won't get pissed off 'cos the marker you stuck 300 quid into is now worth 100!

[Tazz]

I have had an Aggressor for well over a year now, and did use it as a first marker (until I bought a Electra DX). The best upgrade I ever bought was a Nyte stick barrel from F/Bobs, they are a cheap barrel, but don't be put off they work very well. Might be worth looking into a X-chamber if you say that you are happy with Co2 (32 degree 6 stage, Bob's again). You will have to buy a frount bottle mount, don't think Bob's do them, but other companys do (planeteclipse being one). Also a good mod' is to shorten the trigger pull. There are also a lot of sites on the net that give you details on how to do this. The last thing I did was put a 32 degree turbo valve & spring set in it, found that I could back the spring off & still get the feet per second up to 300 without a problem. Another good thing about this is that I was getting quite a few more shots from the same amount of gas.
I estimate that I done about £80 on everything, this includes the postage from the US on the valve & spring set, but Bob's now do the springs, they are the same as the rebel set.
Hope this helps.:)