Impulse. Help required

[robtattoo]

Hey. Is there anyone out there (pref in York area) who has a lot of experienc with Impys? Just picked one up & i know nowt about electro markers, so I'm after someone who can spare me a little time, to show me how to set it up, strip & clean, service it etc.
Any help would be much appreciated. Please feel free to PM me with phone numbers so I can contact you. Normal abuse in the usual way please.

Ta. Rob:cool:

[Tom]

I can fix cockers, shockers, spyder clones and mags but never had a play with an impulse - sorry :(

Tom

[Ch1mpster]

advice. dont fix what aint broke. if its working dont pull it apart
clean the outside but dont worry about the internals til they go wrong

[skel]

sorry, but i have to completely disagree with the previous post. I have a shocker, and it is crucial that it get well looked after. If muck gets in the noids then it can cause big problems (read - smart parts charge the earth for a new noid, so don't let it get damaged). Seeing how an impy also has a noid, i think u should find out how to strip it down. Also, if something goes wrong while your playin, it aint the best time to figure out how it works. A little advice tho, look for a guide on the net (there's bound to be one), and then take it apart (slowly, so u don't loose anything).

hope this helps :)

[robtattoo]

Just found out why it's not firing properly. The f*ckin' pot switch's snapped off the f*ckin' circuit board, so now I've got to get a new f*cker. No doubt Smart Parts will want the soul of my firstborn f*ckin' child for a new one. BOLLOCKS!!!:mad: :mad: :mad: :mad: Unbef*ckinlievable.:mad:

[skel]

you could try soldering :) it might work, although i haven't tried it b4, so your choice :)

[Tom]

I have a friend who had the same problem - wonder if it's a design flaw with the impy?

Tom

[Welsh]

Give it to Tom
I'll lend him my soldering iron and he can re-attach it.
He put the switch back on my chocker and that works :rolleyes:
Or at least the switch does!:D