Inferno user manual

[MARK W]

I've just bought a second hand Inferno, and would like to get hold of a user manual/strip-down diagram.

Any ideas where I could get one from?

[Eric]

they are so simple,

unscrew all the screws, drop it, and you have yourself a jigsaw puzzle plus a learning experience!:p

but seriously, take it apart, there arent any complicated bits:)

[Scottie]

i had one will see if i can find manule

[rayko]

Or you could d/load it from here

http://www.arrow-precision.com/techsupport.html

[MARK W]

Having problems trying to download from the arrow-precision site. Anyone else finding this?

[rayko]

No probs here...

Try right clicking on the link and doing a Save Target As... to download it, and then open it seperately.

Edited: When you see the exploded diagram of the marker, dont sh1t yourself. Safety first, take the barrel off and degas the marker. As has been previously said you really only need to unscrew the four body screws (make sure you hold the ends of the marker as these are normally under abit of tension from the main spring). If you need to take the gripframe off the body, undo the two springs.

Remember when you put the marker back together, the bumper goes at the end where the velocity adjuster sits. And you may need to 'shoot' the hammer to get it back into the body (push the hammer with your finger and pull the trigger.