Hey guys!
Got my new ASA (thanks bob's) now in black and went to attach. Unfortunately, i can't get the allen key out which holds the rail onto the bottom of the gripframe. Removed the board to allow more space but it appears to be absolutely stuck and won't shift at all. Any suggestions?
they can be troublesome little buggers so put a tube(metal) on the end to give you more leverage...
UKPSF 2092
experience comes with playing, not talking
www.nighteyes.co.uk Paranormal investigators
A blind fool in a room may think there is no door, and thus be imprisoned by his own ignorance.
A wiser blind man will check the walls systematically until he finds the door that was there all along... We need to find that door.
Alright, i'll try and find something...
A spanner works well for this too, so long as you have the ring end on the other end of the spanner. (If that made sense?!)Originally Posted by Lambchop
http://www.BradloPhotography.com/ - Paintball/Action Sports Photographer
Nope.......
Nope
That thing
http://www.BradloPhotography.com/ - Paintball/Action Sports Photographer
Erm... wouldnt that be a bit big for a little allen key?
Nooo, for leverage. Like Tonys suggestion with the metal tube, i just meant that you can use that type of spanner for the same thing as the tube. And if its a little allen key, use a little spanner
http://www.BradloPhotography.com/ - Paintball/Action Sports Photographer
Oh... Done it now anyway. Took the board out, made it much easier despite the 40 minutes battling with the tiny little screws afterwards...
Don't worry! i did get it back together.... Just.
Posting Permissions
Reply With Quote
Bookmarks